-
fieldbus interface
- cu305 pn: 1 profinet interface with 2 ports (rj45 sockets) with profidrive v4 profile
- cu305 dp: 1 profibus interface with profidrive v4 profile
- 1 drive-cliq socket, used solely to connect a drive-cliq motor or a sensor module
-
1 onboard encoder bbbbuation for bbbbuating the following encoder signals
- incremental encoder ttl/htl
- ssi encoder without incremental signals
- 1 pe/protective conductor connection
- 1 connection for the electronics power supply via the 24 v dc power supply connector
- 1 temperature sensor bbbbb (kty84‑130 or ptc)
- 3 bbbbbeterizable, fail-safe digital bbbbbs (isolated), or alternatively 6 bbbbbeterizable digital bbbbbs (isolated)
- 5 bbbbbeterizable digital bbbbbs (isolated)
- 1 bbbbbeterizable, fail-safe digital output (isolated), or alternatively 1 digital output (isolated)
- 4 bbbbbeterizable bidirectional digital bbbbbs/outputs
- 1 analog bbbbb ± 10 v, resolution 12 bit sign
- 1 serial rs232 interface
- 1 slot for the memory card on which the firmware, bbbbbeters and licenses can be stored
- 1 pm-if interface for communication with the pm240‑2 power modules in blocksize bbbbat (usable as of firmware v4.4 sp3)
- 2 test sockets and one reference ground for commissioning support
- 1 interface to the bop20 basic operator panel
- voltage
- low level (an open digital bbbbb is interpreted as "low")
- high level
- current consumption at 24 v dc, typ.
- delay time of digital bbbbbs 1), approx.
- l → h
- h → l
-
delay time of high-speed digital bbbbbs 1), approx.
(high-speed digital bbbbbs can be used for bbbbbbbb detection) - l → h
- h → l
- conductor cross-section, max.
- voltage
- load current per digital output 2), max.
- delay time 1), approx.
- conductor cross-section, max.
- internal resistance
- incremental encoder ttl/htl
- ssi encoder without incremental signals
- encoder supply
- bbbbb current range ttl/htl
- encoder frequency, max.
- ssi baud rate
- resolution absolute bbbbbbbb ssi
- cable length, max.
- ttl encoder
- htl encoder
- ssi encoder
- bbbbb
- height
- cu305 pn
- cu305 dp
- depth
- cu305 pn
- cu305 dp
s120控制单元6sl3040-0ja00-0aa0
上海斌勤电气技术有限公司专业从事西门子这个品牌已经有10年。
在松江工业园区有一定的名声
不要问我有没有 西门子常规的都现货 支持上门提货
有需要的新老顾客欢迎上门提货谈生意（老顾客注意公司地址更改）
上海斌勤电气技术有限公司(西门子尊龙凯时app的合作伙伴）
联系人 ：康 奎(业务经理）发布(联系我有优惠福利哦）
地 址：上海市松江区三新北路1800弄（松江商务电子园区）24号楼5005室.
s120控制单元6sl3040-尊龙凯时app跳转到概述cu305 pn control unit the cu305 control unit for the communication and open-loop/closed-loop control functions of a sinamics s110 is combined with the pm240‑2 power module in blocksize bbbbat (usable as of firmware v4.4 sp3) to create a powerful single drive. 
设计the cu305 control unit features the following connections and interfaces as standard:
集成the cu305 control unit controls the pm240 2 power module in blocksize bbbbat (usable as of firmware v4.4 sp3) via the pm-if interface. a bop20 basic operator panel can also be snapped directly onto the cu305 for diagnostic purposes. drive-cliq motors can be connected to the integrated drive-cliq socket as well as sensor modules (smc) to permit the operation of motors without a drive-cliq interface. the status of the cu305 is indicated via multi-color leds. the cu305 can be operated optionally with memory card. the firmware and project data are stored on the memory card pluggable from below, so that the cu305 can be replaced without the support of software tools. this memory card can also be used to perbbbb standard commissioning on multiple drives of identical type. the card is available as an empty memory card or containing the latest drive firmware version. the card also contains the safety license for the extended safety functions. to use these extended safety functions, a memory card containing the safety license must be permanently inserted. the cu305 and other connected components are commissioned and diagnosed with the starter commissioning tool. connection example of cu305 control unit
技术规范
1)the specified delay times refer to the hardware. the actual rebbbbbb time depends on the time slice in which the digital bbbbb or output is processed. 2) in order to use the digital outputs, an external 24 v power supply must be connected to terminal x124. 3) signal cables twisted in pairs and shielded.
|
全部关于 cu305 control unit
|
s120控制单元6sl3040-0ja00-0aa0
- vmic vmivme 7587 电路板
- 西门子 3wl1232-3cb36-1ba4-z 空气循环断路器
- 河北ics t9401 aadvance数字输入模块8通道
- 凌海ics t9802 aadvance数字输入模块16通道
- 浙江ics t9852 aadvance数字输出模块8通道
- 西门子 nfk3b100 100a 断路器 nfk3b100l
- abb 断路器 xt7hu312efff000xxx
- eaton izmx40b4-v16w 空气循环断路器
- square d lgf36400ru33xso
- 全新 square d nw08h3
- siemens 3wl1216-4cb34-4an2
- smc mqr2-m5-x58 旋转接头
- 青海ics t9902 aadvance基本单元处理器
- pmc661j ramix 以太网接口卡
- .@市场推送:a5e35632577江西省工控新能源